Ποιοτικά CNC routers για όλους

Η Stepcraft παρέχει μοναδικές προτάσεις, ένα ευρύ φάσμα καινοτόμων λύσεων και μια συλλογή CNC που ανταποκρίνονται σε όλα τα είδη κοινού.

STEPCRAFT Q-Series

θέτει νέα πρότυπα στην ατομική και τη επαγγελματική παραγωγή με τη βοήθεια CNC.

STEPCRAFT D-Series

έχουν αναπτυχθεί ειδικά για χρήση στον ιδιωτικό και τον τομέα των μικρών επιχειρήσεων καθώς και στα εκπαιδευτικά ιδρύματα. Μπορούν να είναι εξοπλισμένα με ένα πλήθος διαφορετικών εργαλείων που σας επιτρέπουν να χρησιμοποιείτε τα CNC Systems μας για μια μεγάλη ποικιλία εφαρμογών.

ΤΕΛΕΥΤΑΙΑ ΠΡΟΪΟΝΤΑ

4.90

With the Exhaust Air Hose you can easily guide the filtered exhaust air that is emitted out of the laser control unit to an outdoor area. It is available by meter and has an inner diameter of 41 mm and an outer diameter of 45 mm. Notice: Maximum length of hose is 10 metres.

73.90

The Vacuum Adapter is constructed as a ring nozzle, which encompasses the milling cutter completly and reliably extracts the dust. The detachable ring nozzle enables the change of a tool while the Vacuum Adapter is attached. The mounted cup brush provides a good sealing towards the workpiece and recedes with its clamping bars in the […]

73.90

The Vacuum Adapter suitable for your Kress spindle! The vacuum system is constructed as a ring nozzle, which encompasses the milling cutter completely and reliably vacuums the dust. The detachable ring nozzle enables the change of a tool while the Vacuum Adapter is attached. The mounted cup brush provides a good sealing towards the workpiece […]

52.90

The Vacuum Adapter is out of anodised aluminium and constructed as a concentric nozzle. It is compatible with Proxxon IBS/E (or a comparable drill/grinder with 20 mm) as well as model types Dremel 200, 3000, 4000 and 4200. This can be accomplished with the use of the appropriate Air Regulator extraction. Scope of Delivery: Concentric […]

9.90

Carbide knives for the offered Drag Knife Holder. Variants: angular degree: 30, suitable for very thin foils angular degree: 45, suitable for foils till 0,5mm angular degree: 60, suitable for foils over 0,5 mm

6.99

Characteristics: Industrial Quality Problem-free chip evacuation Low wear Clean surfaces Applications: High quality contours As only one Flute, much space for chip evacuation Very good for softmaterials Soft plastics PE, Teflon, Plexiglass, Styrodur Soft Aluminium Available as ø1mm, ø2mm and ø3mm Technical Specifications: Solid Carbide-End Single-Flute Flat Bottom Upcut-spiral (Shank): 3,175mm (1/8″)

5.99

Characteristics: Industrial Quality Through Fishtail Bottom easy dive into material Low wear Clean surfaces Applications: universally applicable Aluminium Plastics Wood Available as ø1mm, ø2mm, ø3mm Technical Specifications: Solid Carbide-End Mill Ø1,0mm Double-Flute Fishtail Bottom Upcut-spiral (Shank): 3,175mm (1/8″)